User manual
- 18 -
Change the S
etup
settings
Most of the internal settings and information is stored inside the S
etup
menu. To explore and
modify them is simple. Below is an example
how
to modify the Auto Start setting. Please note
that the
default setup is set for optimal performance of the
system
, it is unnecessary to change if
you are satisfied with the outcome.
When you turn on your
system
, after it has booted up, you should see the following signifying
your
system
is ready.
Step 1:
Use the
up or down arrow button to navigate to the
Setup
menu
.
Step 2:
Press
the
ENT /Enter button to enter the
Setup
menu and you shall see a
screen
similar to below:
Step 3:
Use the up or down arrow button to navigate to the Auto
Start setting.
Step 4:
Press
the
ENT /Ent
er button to enter the
Auto
Start
setting
and you shall see a
screen similar to below:
Step 5:
Use the up or down arrow button to change the value to Full .
Step 6:
Press
the
ENT /Enter button to
submit the change.
Once completed
, you will be
guided back to the
setting menu.
DISCMAKERS
X.xx
4
.Setup
S
etup
1.
Select Burn Speed
DISCMAKERS
X.xx
1.Copy
Setup
10
.
Auto Start
Auto Start
Auto
Auto Start
Full
Setup
10
.
Auto Start