User manual
- 8 -
Or, you can choose to enter the desired number of copies for this job by follow
ing
the simple
procedure below:
a)
Simply
press the up or down button to
the
following screen:
b)
Then press
the ENT /Enter button to submit. Y
ou should see the following
Specify
Counter
screen:
c)
Please refer to
the
Input Name and Number section of Chapter 2: Getting to know
your
System
on how
to enter the
desired amount. Then press ENT /Enter to
continue
to the
next step.
Step 3:
Once the
Counter selection is submitted, you shall see
the
following Preparation
screen
and
the
corresponding trays
that do not contain
disc
(s) in them
will
automatically
be
ejected
:
OR
If either one of the above screens is displayed for more than 2 minutes after you
have
inserted
your master disc
or blank discs, please check the
quality
of the discs
.
Step 4:
After you ve placed your master disc and blank discs in the
drive(s)
, p
lease
allow 5
-
10 seconds for the
system
to detect
them.
I
f the
writer
is
filled and the
system
detects this, the
system
will start automatically.
Counter:
Specify Counter
Specify Counter:
[ ] OK?
Preparing
Waiting for Master
Preparing
Waiting for Blanks
Processing...
Please Wait