User manual

- 7 -
Chapter 3: Basic Operations
Make Disc - to - Disc Copies
This process will copy your master disc o nto one blank disc. A good conditioned master disc
and a lower recording speed is recommended for high er success rate s and better quality
duplications.
Section 1: Making Copies from the Reader (when the Reader is selected as the
source drive).
Step 1: Use the up or down arrow button to navigate to the Copy menu :
Step 2: Press the ENT /Enter button to enter the Copy menu. You may then see the
Counter feature screen if that feature is enabl ed . If you do not see the counter
screen skip to step 4.
The Counter feature will let you choose how many copies you want to m ake for your project.
It allows the system to count the number of copies you ve made for this job and prompt you
when the desired number has been achieved .
The Counter feature is for your convenience only, and will allow you to make more
copies than the amount desired, if so required.
You can choose not to input your desired number of copies if you prefer to copy
continuously with no interruption. (It will still count the number of copies you ve made for this
job, but it will not notify you when to stop. ) To do so , simply press ENT /Enter button when
you see the No Counter on the 2
nd
line of the screen below:
DISCMAKERS X
.
xx
1.Copy
Counter:
No Counter
Counter:
No Counter