Version: 2020-05-25 User Manual Model: SB1008
1. Quick start guide Overview 1. Screen 2. Touch key 3. Charging POGO PIN Make sure the POGO-pins on the charging cable fit correctly onto the charging terminals on the back of smart watch. Plug the big end of the USB cable to a power source and after successful charging, a charging icon will appear on the screen. Install “Orunning” app on the phone Search and install the “Orunning” app from Google Play or App Store. Or scan the following QR code to install the app directly.
“Settings” menu. 3. Tap “Connect device” in the “Settings” menu. 4. Select the smart watch icon to connect. 5. Choose your device name to connect it with your phone. Unbind smart watch with mobile phone 1. Open “Orunning” app on your smart phone. 2. Tap “Disconnect device” in the “Settings” menu and confirm “OK”. 3.
2. Functions Watch face There are 3 watch faces. In the current watch face, press and hold the touch key to choose the one you like. Daily activities The watch will record your daily activity automatically. Press the touch key to check pedometer, distance and calories. After synchronizing with Orunning, these sports data can be also checked in Orunning. Sports Press the touch key repeatedly until Sports icon shows on the display and long press the touch key to enter in the multi-sport mode.
The smart watch has 4 sports modes: Walking, Running, Cycling and Hiking. Long press touch key to choose one of them and then do sports. The smart watch will record your sports data. When you finish your sports, you can long press the touch key twice to stop your sport and save the sports data. If you’ve connected your smart watch with the “Orunning” app via Bluetooth, you can also check your sports data in the app. Note: If the exercise time is less than 5 minutes, the data cannot be saved.
Weather After connecting with Orunning, you can select city in advanced settings of the app. And the weather of this city will be displayed on the watch. More Press the touch key repeatedly until “More” icon shows on the display and long press the touch key to enter in “Power off”, “About”, “Find Phone” and “Reset”. Power Off Long press the touch key to turn off the watch. About Long press the touch key, you can check watch name, BT marc address and firmware version of your watch.
Find Phone After connecting with Orunning, you can look for your phone by long press the touch key. Reset Long press the touch key, your watch will be reset and restart. Sedentary reminder Turn on the sedentary reminder you’ve set in Orunning. When the time is up, your watch will vibrate to remind you to do some sports. Remote capture After successfully connecting with Orunning, choose “Take pictures” in Orunning, and then short press the touch key to take photos, and long press the touch key to exit.
Notifications After successfully connecting with Orunning, turn on “Notifications” in Settings, you will receive these notifications on your watch. More functions Enjoy more smart functions in Orunning.
3.FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
