Installation Instructions

Recommended Products:

Reflective/Bubble/Bubble/White - Roll: RDBW48100 (48”x 100’)

Open Interior with 3/4” Thermal Breaks

R-5.5* Heat Flow Down

R-3.4* Heat Flow Up

Open Interior without Thermal Breaks and a Nominal 3/4” Drape

R-7.5* Heat Flow Down

R-3.6* Heat Flow Up

Installation Instructions: (There are 2 options)

1. Open Interior with 3/4” Thermal Breaks

• The Reflectix

Insulation is installed with the “white side” towards the interior of the building.

• After the red metal is erected, install the Reflectix

Reflective/Bubble/Bubble/White product over the

purlins by using 1/2” self-tapping metal screws and screwing the foil to the purlins.

• Tape the seams with a Reflectix

Foil Tape (goal is an air-tight, snug seam seal).

1. Reflectix

Insulation

2. Exterior Roof Panel

3. Purlin

4. Red Metal (Structural

Frame)

Tools Required:

Safety Glasses

Tape Measure

Utility Knife

Screw Gun

Metal Building / Roof / New

Reflectix Installation Instructions