Installation Instructions

Recommended Products:

Reflective/Bubble/Bubble/White - Roll: RDBW48100 (48”x 100’)

Inside the Girts

Open Interior • R-4.2* Heat Flow Horizontal

Installation Instructions:

• The Reflectix

Insulation is installed with the “white side” towards the interior of the building.

• Reflectix

Reflective/Bubble/Bubble/White Insulation can be installed either vertically or

horizontally.

• Attach the product to the inside of the girts using 5/16” staples at approximately 4” intervals.

• Tape the seams with a Reflectix

White Poly Tape (goal is an air-tight, snug seam seal).

* Includes thermal resistance of 0.68 interior air film.

Calculation Disclaimer: All values are calculated based on the “ASHRAE Handbook of Fundamentals”.

1. Reflectix

Insulation

2. Exterior Wall Panel

3. Girt

4. Post

Tools Required:

Safety Glasses

Tape Measure

Utility Knife

Staple Gun

Post Frame Building / Wall / Retrofit

Reflectix Installation Instructions