Pro Residential, Post Frame and Metal Building Applications

Recommended Products:

Staple Tab, Reflective/Bubble/Bubble/Reflective - Roll: ST48100 (48”x 100’)

Open Interior with 1”x 2” Furring

R-11* Heat Flow Down (and a Radiant Barrier)

R-4.4* Heat Flow Up

Please Note: In addition to the stated R-value, this application also provides a Radiant Barrier.

As a result, a 96% reduction of the radiant energy that ordinarily would be transmitted to the interior of the building is blocked.

Installation Instructions:

• Pre-installation inspection - Check the roof area for clutter, water sprinklers, conduit and lights.

Sprinkler systems are especially important. All water pipes must be below the Reflectix

to prevent

the possibility of freezing in the winter. In many instances the Reflectix

product must be installed up

near the roof deck.

• Install 1”x 2” furring strips on the bottom of and perpendicular to the Z purlins on 22” centers.

Utilize 1 1/4” self-tapping sheet metal screws to secure the furring strips to the Z purlins.

• Butt the furring strips together and tape. Staple tape for reinforcement.

1. Reflectix

Insulation

2. Exterior Roof Panel

3. Purlin

4. 1”x 2” (Nominal)

Furring Strip

5. Red Metal (Structural

Frame)

Tools Required:

Safety Glasses

Tape Measure

Utility Knife

Screw Gun

Staple Gun

Metal Building / Roof / Retrofit

Reflectix

Installation Instructions