Pro Residential, Post Frame and Metal Building Applications

Recommended Products:

Staple Tab, Reflective/Bubble/Bubble/Reflective - Roll: ST48100 (48”x 100’)

Inside the Girts

Metal Interior • R-6.3 Heat Flow Horizontal

Open Interior • R-5.3* Heat Flow Horizontal

Installation Instructions:

• The Reflectix

Reflective/Bubble/Bubble/Reflective, Staple Tab product can be installed either

vertically or horizontally.

• Attach the product to the inside of the girts using 5/16” staples at approximately 4” intervals.

• Tape the seams with a Reflectix

Foil Tape (goal is an air-tight, snug seam seal).

• For interior covering, attach 1”x 2” furring strips perpendicular to the girts through the insulation.

• Attach interior panel to the furring strips.

• This will provide a 1” (nominal) air space between the interior panel and the insulation and a 1 1/2”

air space between the insulation and the outside panel.

1. Reflectix

Insulation

2. Exterior Wall Panel

3. Girt

4. Post

Tools Required:

Safety Glasses

Tape Measure

Utility Knife

Staple Gun

Post Frame Building / Wall / Retrofit

Reflectix

Installation Instructions