Specifications

GOSSEN
LUNA-PRO S
FLASHES & ACCESSORIES
303
ORDER & INFO. [phone] • FAX: [phone] [phone]
1-800-290-6750 • www.bhphotovideo.com
Analog Incident and Reflected Lightmeter
The Luna-Pro S is a classic analog reflected and incident light meter. As a system meter, it will provide
correct exposures in any situation. Although the symbols of the Sun and the Moon in the middle of the
calculator disc represents the two measuring ranges which can be selected, it is at dusk where the Luna-Pro
S performs at its very best. With its low end range value being -4EV, the meter has ample capacity for
extreme low-light levels with very long exposures. When a reading is taken and the meter’s rocker switch is
released, the indicator needle “freezes” making it easy to read off shutter/aperture combinations. Transfer
the number indicated by the needle to the corresponding number on the yellow scale, against the yellow
index mark and you can read off the required shutter speed, f/stop combination of the calculator dial, it’s so easy.
PHOTO - VIDEO - PRO AUDIO
◆ Continuous, incident, and reflected light
measuring
◆ Extra large measuring range, divided into high
light and low light scales.
◆ Scales for shutter speeds, f/stops, exposure
values, cine speeds, and the zone system.
◆ Setting ring for exposure corrections and
extension factors (with a highly visible red
reminder indicator).
Specifications
• Angle of Coverage: 30° • Apertures: F1 to F90
• Display Metering: Scales with needle
• EV Corrections: -6 to + 6
• Extension Factors: 1.0 to 64
• Film Speed ISO: 0.8/0° to 25,000°
• Ambient Measuring Range: EV -4 to +17
• Shutter Speeds: 1/4000 sec. to 8 hours
Luna-Pro S
(GOLPS) ................................................399.95
MAVOLUX 5032C
Digital Footcandle and Lux Meter
The Mavolux 5032C is a highly accurate light meter capable of measuring illumination in either footcandles
or lux. Candelas/m2 and footlamberts can also be measured with the optional luminance attachment
(4141). The Mavolux 5032C is equipped with color correction, so that its spectral response is matched
to that of the human eye, in accordance with DIN 5032, part 7, class C. Integrated cosine correction is
included in order to assure that oblique incident light is also evaluated correctly. Ideal for industry,
trade, electricians, architects, institutes, inspection authorities and also photo and film studios. Even very
strong light (e.g. from car headlights) can be measured without any additional accessories.
Automatic/Manual Measuring Range Selection:
Either lux or footcandles can be selected as a measured
quantity. The measuring range is then automatically
matched to the quantity. The current measuring range
can be locked by pressing a key, or any one of four
measuring ranges can be selected manually.
Hold Function: The current
measurement value can be held
at the display by pressing the
data hold key.
MAX Function: The largest measurement value
which occurs after this function has been
activated is stored to memory in order to
determine maximum illuminance or luminance.
Mavolux 5032C
(GOM5032C)...........................................................................................................624.95
Optional Accessories
An assortment of attachments are available to extend the meter’s versatility and capabilities.
Variable Angle Attachment (GOVAA): This attachment with optical viewfinder reduces
the measuring angle to 15º or 7.5º.The desired angle is selected with the sliding switch.
Color coded circles in the viewfinder assist in aiming to the spot in the image you wish
to measure. Attaching the accessory is quick and simple ............................................99.95
Enlarging Attachment (GOEA): Turn the Luna-Pro S into a specialty meter for the
photographic darkroom. Place the measuring aperture of the Enlarging attachment in
the projected negative image at the desired spot and the corresponding density value
can be measured. The paper grade can be determined by metering the contrast at
various areas of the projected image.............................................................................79.95
Fiber Optic Probe (GOFOP): Even well hidden spots can be reached with this measuring
probe. The highly flexible probe is about 15
3
⁄4˝ long, the measuring aperture is 3/16˝ in
diameter. This makes the probe very
convenient for measuring in those difficult to reach
spots, for example in macro photography.
Also for measuring on the camera ground
glass (ambient only) .....................................................................................................309.95