Specifications

LUMEDYNE
SYNC CORDS & ACCESSORIES
FLASHES & ACCESSORIES
278
www.bhphotovideo.com
PHOTO - VIDEO - PRO AUDIO
Sync Cords
Industry-standard sync cords for
Lumedyne Flash Heads have an “H” style
“household” plug connection at one
end and a standard PC connection at
the camera end. These heavy duty
connectors assure that a proper and
constant connection is maintained.
Coiled Sync Cord
(LU030)
This heavy duty sync cable stretches
from 2´ to 5´......................................28.00
15´ Straight Sync Cord
(LUASC3)
A heavy duty sync cable with a 15´ reach
for setup versatility...........................37.50
Super Sensitive Camera Sync Filter (LU088)
Plugs into a flash at the
household (H type)
sync jack and limits
the voltage presented
to the camera to 6.5v.
This is very important
for some digital cameras as
well as film cameras.................................58.50
Soft Diffuser Globe
(LUADG4G)
Diffuses light over the widest possible area
(over 360° like a bare bulb, but directs more
light forward with gradually less reaching the
foreground when used with a reflector, or
may be used over a bare bulb for even
diffusion. The light output will be reduced by
two full f-stops.........................................19.95
Standard Reflector
(LU091)
The standard reflector included with every
head. Two operating positions, NORM and
WIDE, allows you control over angle of
dispersion.................................................19.95
Extra-Wide Reflector
(LU091W)
Fits all flash heads for wide angle applications.
Reflector is slightly shallower than the
tandard reflector, allowing the flash tube to
disperse its output in a wider pattern ....23.95
Op/Tech Deluxe Strap
(LUASDL)
A padded nylon, elasticized, contoured
adjustable strap to ease carrying of all
Lumedyne power packs...........................29.50
Accommodation Kit
(LU075)
A handy collection of small items often lost
or broken line switch and jack covers, screws,
rubber feet, jewels, etc .............................18.95
Anti-Twist Plates
Anti-Twist Plate (LUANTR)
For the round-style Lumedyne head
when used on a flash bracket.............8.95
Anti-Twist Plate
(LUANTS)
For the square-style Lumedyne head
when used on a flash bracket.............8.95
Extension Cords
Extension cord extends the head’s cable
by up to 20´.They have a very low line
loss of a 1/4 f-stop at 20´, and less with
shorter cables.
Straight 20´
Extension Cord
(LU032) ....................58.50
Straight 5´
Extension Cord
(LU034) ....................47.50
Coiled 3-to-8´
Extension Cord
(LU035) ....................57.95
Straight 10´
Extension Cord
(LU036) ....................49.95
Mounting Accessories
Coiled Sync
Cord
Accommodation
Kit
Op/Tech
Deluxe Strap
Extra-Wide
Reflector
Straight 20´ Extension Cord
Coiled 3 to 8´ Extension Cord
15´
Straight
Sync Cord
Head and Umbrella Adapter
to Light Stand
(LU047P)
This is a versatile bracket that will
fit on almost any light stand. It
includes two removable, reversible
studs to adapt to light stands with
top studs smaller than the standard
5/8˝. It also includes a shoe
mount, which will accept virtually
any shoe-mount flash unit......38.50
Swivel Tilt and Bounce with Adjustable Stop
(LU045)
Adjustable stops allow 200° of swing between user-
definable points. Includes 1/4-20˝ hardware.......27.95
3˝ Extension Post
(LU041):
Raises the height of any light head with a 1/4-20˝
threaded receptor an additional 3˝ ......................17.95
6˝ Extension Post
(LUATP6):
Raises the height any light head with a 1/4-20˝
threaded receptor an additional 6˝ ......................17.95
Head and
Umbrella Adapter
Swivel Tilt
and Bounce
3˝ and 6˝
Extension Posts