Specifications

LUMEDYNE
FLASHES & ACCESSORIES
275
ORDER & INFO. [phone] • FAX: [phone] [phone]
1-800-290-6750 • www.bhphotovideo.com
Auto Exposure Handle Module
for Lumedyne Flash Heads
Now you can also control the exposure of any head with it’s own Auto Module—up to
2400ws. Shaped like a fat handle for a strobe, the HAHM Auto Exposure Handle has
seven manual settings and seven auto settings all of which can be trimmed in between
settings for exact exposures. Manual power above 200ws is controlled by the power pack.
Automatic power is controlled by the HAHM up to 2400ws. Head Cables are used to
connect to both the pack and the head. You can use Head Cables to mount the Head
away from the auto sensor and control panel. This is handy in order to use light
modifiers or go off camera while the sensor and controls stay near the camera.
◆ Seven manual f-stops with trim control between
f-stops from 3ws-200ws
◆ Automatic exposures between 3ws and 2400ws
with trim control between 7 f-stops
◆ 1/4-20 threaded mounts on the top and bottom
allow for various mounting techniques
◆ Test fire, OK confirmation and sync connection
HCST: 5´ straight cord with male and female
Lumedyne connectors
(LUHCST) .............46.80
HCCD: 3-7´ coiled with male and female
Lumedyne connectors (
LU035) ................57.95
HC10: 10´ straight with male and female
Lumedyne connectors (
LU036) ................49.95
HC20: 20´ straight with male and female
Lumedyne connectors (
LU032) ................58.50
HCA1: 1´ straight cord with male and female
Lumedyne connectors. Used as an extension
cord for an Auto Module on a camera
bracket (
LUHCA1)......................................39.95
HFTX: Plugs into the head where the flash-
tube normally goes and extends the flash-
tube to the end of the 5´cable (
LU037) ....66.95
HAQQ: Adapts the Lumedyne-style head
jack on a pack to a Quantum-style connector
for the QFX heads (
LUHAQQ) ..................35.10
Booster Modules
Booster modules add extra power to your system. When you double the w/s (watt/seconds),
you gain one f-stop (200ws to 400 ws) and get half as many flashes per charge. Boosters
only effect the highest setting on a power pack. They are available in 200ws or 400ws levels.
Deluxe boosters have additional asymmetrical flash head jack(s). The 200ws Deluxe
Booster has one extra head jack controllable at 100 or 200ws or send the boost up to the
Pack.The 400ws Deluxe Booster is like two of the 200ws Deluxe Boosters in one box and has
two individually controlled head jacks.
X2BC (LU071A)
200ws of additional power when it is stacked
between the battery and power pack. On/Off switch
for the additional boost power. Can be stacked with
other boosters...................................................171.00
X2DL (LU072)
200ws of additional power stacked between the
battery and power pack. One head jack. Send the
power up to the pack or 200ws/100ws to head jack
on the booster. Can be stacked with other boosters
for more options. Can be used on AC alone ..202.00
X4BC (LU073)
400ws of additional power when it is stacked
between the battery and power pack. On/Off switch
for the additional boost power. Can be stacked with
other boosters...................................................299.95
X4DL (LU074)
400ws of additional power stacked between the
battery and power pack. Two head jacks. Send some
or all of the power up or divide symmetrically
between the head jacks. Can be stacked with other
boosters. Can be used on AC alone.................339.95
HAHM
PHOTO - VIDEO - PRO AUDIO
Head Cables (Can be used directly to a Flash Head or as an Extension Cord)
Autoexposure Handle Module
(LUHAHM)......................................256.50