User`s manual

ENGLISH

4. To atten the lm close the upper latch and adjust it by shifting it up and

down.

5. OPTIONAL: Lock the lm in the holder by moving the lock bar to the left.

The silver fastener will be next to the closed lock icon embossed on the

bar.

NOTE: Make sure that the lm is as at as possible between the latches (see below).

ex.: attened lm ex.: curved lm

CORRECT INCORRECT

Position: lockedPosition: unlocked

Shift up and down

Loading 120 lm into the holder (continued)

Note: Orientation of scanner in the diagrams is from the front of the unit. Take note

of the ”120 FILM HOLDER” embossed lettering on the front of the 120 lm holder

also facing towards the front of the scanner for correct orientation when loading the

scanner.

• Insert the holder into the front of the scanner, pushing it in as far as it will go.

• To release the holder, gently pull it out.

Loading 120 lm holder into scanner

ex.: correctly positioned lm, ex.: incorrectly positioned lm,

lower left corner at the triangle not aligned with triangle mark

mark