User guide

12
Calibrate
If dark lines or stripes appeared on the scanned
image, please perform the calibration of your
scanner.
Tap the iPad screen.
Tap the (Settings) at the top-right corner
of the app, tap the Calibrate.
Remove the plastic foil on the Calibration
Card, insert it with the arrow mark facing
toward the shown direction to the Feed Slot.
Tap the Calibrate button.
* When the calibration is finished, the Calibration Card
will be ejected, and the success message appears.
Tap the OK button.
To get the best scan quality, perform the
calibration periodically.
Make sure the Calibration Sheet is clean and
free of dust before use.
1.
2.
3.
4.
Calibration done.
OK