User`s manual

ENGLISH

IV. Thumbnail Panel Area [Floating Windows]

Images only appear here in Prescan mode, scan to  le goes directly to

the hard drive, this window remains blank as does the main Cyberview

window.

Displays thumbnail view of pre-scanned images. By default all pre-scanned

images are selected. Note the small check mark below each image.

When scanning more than 6 frames (6 at a time are viewable in the thumbnail

panel) you may scroll to view more by clicking on the right arrow button. The left

/ right arrow buttons allow you to scroll throught pre-scanned images with ease.

To de-select frames you do not wish to scan click on the check mark box

to remove selection.

ENGLISH

CyberView

For information regarding the  lm scanner and CyberView driver, please visit

www.re ecta.de.

Transportation

For safety purposes, follow the procedure below before transporting the scanner

(i.e. before moving the scanner from one location to another or packing and

shipping the unit):

1. Plug in the power adaptor. Turn on the power switch.

2. Wait for the scanner to warm up (around 50 seconds).

The LED indicator will always blink during warm up.

3. After LED indicator turns ON, turn o the power switch.

Bundled application software

For questions regarding bundled application software you can refer to the HELP

function on the application menu bar or visit the software company’s website.

**This user manual has also been archived in the packaged CD.

TECHNICAL SUPPORT