User`s manual

ENGLISH

2. Color Balance

To adjust the brightness, contrast, saturation, and color (CMY or RGB)

of the image. Comparisons between before and after adjusted images

are shown for reference.

Example:

If a previewed image appears too dark, use the “Brightness” slider in the

“Color Balance” window to adjust the image by selecting the slider in the center and

moving it to the right. The image’s “After” view becomes lighter. Select “OK” to accept

the changes which will be sent to the scanning hardware. This can also be used to

adjust each of the functions in “Color Balance” by contrast, saturation and speci c

color ranges of cyan, magenta and yellow.

3. Curves and Levels

Adjust image settings by moving Curve and Levels settings.

Comparison between before and after adjustment is displayed for

reference.

Example:

When the previewed image appears to be too dark, adjustments with

the Input slider in the Curves and Levels window can be made to correct the im-

age. Selecting the Gray slider in the center and moving it to the left will result in

changes in the “After” view resulting in a lighter image. Once the adjusted image

is acceptable select “OK” to send changes to the scanning hardware. The same

method can also be used to adjust each color channel independently, using the

channel drop down menu “RGB = All colors” R = Red, G = Green, and B = Blue.