User`s manual

ENGLISH

“Prescan Resolution“ - Default pre-scan resolution.

“Using default real scan resolution“ - Enables default scan

resolution setting.

“Color Depth“ – Default color depth while scanning.

“Scan Mode“ – Default scan mode while scanning.

Select Scan - Preference - Film Type - Scan Setting

Con guring Scan settings

1. Select Browse and choose the designated folder to save the scanned

image to

2. Enter the  le name.

3. Trailing Index after Base File Name Digits: De nes the length of the  le

name and numbering sequence up to 6 digits Example image1 or im-

age000001.

STEP 5 – Set Scan Preferences

Advanced Setting

4. Options - Use Film Index: Use the number assigned to the slide based on it’s

position in the cartridge.

User De ned Start Number: Enter a speci c start number

5. Choose the  le type , “TIF” or “JPG”. (TIF uncompressed or JPG Compressed-

Choose image quality for JPEG. (20-100) 100 o ers the least amount of compres-

sion

”Auto Exposure” - Attempts to  nd the correct exposure to get the widest

range of whites and blacks while putting the middle grays at around the

middle of the data range.

”Auto Balance” - Using the image histogram to balance RGB channels. It

estimates images’ color cast and adjust the images accordingly

“Auto Contrast” - The scanner software analyzes the data and automatically

adjusts the Setting for the White and Black Points.

”Digital Noise Reduction” – Applies a  lter, Reducing the  lm grain.