ENGLISH ENGLISH CyberView X5-MS User’s Manual 1
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT ENGLISH This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
h he Getting Started Quick Installation Guide (QIG) Installing Software and Driver Installing Hardware Loading the slides into the Magazine Loading the Magazine into the Scanner Additional Features One Button Scan How to Scan Slides STEP 1 - Acquire Driver STEP 2- Select Film Type STEP 3 - Optional Prescan STEP 4 - Set Scan Settings STEP 5 - Set Scan Preferences STEP 6 - Scan STEP 7 - Exit User Interface I Main Window Area II Preview Window Area III Active Frame Setting Area IV Thumbnail Panel Area Techni
GETTING STARTED ENGLISH Check the package content before getting started. For Quick Installation please refer to Quick Installation Guide. (Ref. Pg. 6) Important! Save the original box, receipt and packing material for future shipping needs. Package Contents • Slide Scanner. • Magazine. • Power Adapter Warning! Using any other power adapter may severely damage the scanner and will void the product warranty. • Power Cord. • USB 2.0 Cable. • CyberView Application software CD. • Printed User’s Manual.
Note: Do not turn on the scanner unless it is within this range. If the scanner has been stored or transported outside of this range, allow it to return to within this range before turning it on. ENGLISH ure Operating Ambient Temperature Range 50º to 104ºF (10º to 40ºC) Operating Ambient Humidity Range 15% to 76% relative humidity (non-condensing) Note: If the scanner is stored or to be transported in cold temperature and then brought into a warm / humid environment condensation may occur.
QUICK INSTALLATION GUIDE (QIG) INSTALLING SOFTWARE AND DRIVER ENGLISH for PC (Windows) User WINDOWS SYSTEMS INSTALLATION DURING DRIVER INSTALLATION A WARNING DIALOGUE BOX MAY APPEAR, IF THIS IS THE CASE PLEASE SELECT “INSTALL THIS DRIVER ANYWAYS”. INST Before If you tion so into th windo Insta a. b. Notice: 1. In “Found New Hardware Wizard” window, select “Search automatically or Browse computer for driver software.” 2. In “Completing the Found New Hardware Wizard” window, click “Finish”.
ally or all in r Before Installing the Scanner Driver... If you choose to use the provided application for image editing, install the application software (ex: Adobe® Photoshop® Elements) by inserting the application CD into the computer’s CD/DVD drive. Follow the instructions that will be displayed in a window that opens automatically. ENGLISH LECT INSTALLING SOFTWARE AND DRIVER Installing Scanner Driver a. Insert driver CD into the computer CD/DVD drive and explore the contents. b.
ENGLISH TWAIN scanner plug-in Installation Guide for Adobe Photoshop Elements 9 and newer versions Load The TWAIN scanner plug-in is no longer installed with Photoshop Elements 9. In order to be able to import scanner device through Adobe Photoshop elements, please follow below instructions after installing Adobe Photoshop Elements 9 to find where and how to install the TWAIN component which was previously installed with the application for versions earlier than Photoshop Elements 9.
Loading slide(s) into the magazine 9. ments, s9 sly 9. General Recommendations: • Braun Paximat S (White tray) especially for cardboard frames and framed slides up to 2-3.2mm inch thickness. • Paximat Magazine (Black tray) for framed slides up to 2mm thickness. • CS Magazine for CS/CS2-framed slides. • Universal Magazine DIN 108 • Glass slides that are attached to glass frames may cause complications due to the hard edges.
Loading slide(s) into the magazine Load CS Magazine LKM M ENGLISH a. Locate the numbering sequence text on the CS slide magazine indicating the slide order. The numbers should be facing up and starting from the left. b. Hold the slide right side up, facing forward so the image is NOT reversed. Rotate the slide as illustrated and Insert each slide, one at a time, into the magazine. CS Magazine Load Unive Numbering Loading slide(s) into the magazine PaximatS Magazine a.
LKM Magazine a. Locate the numbering sequence text on the front of the LKM slide magazine indicating the slide order. The numbers should be facing forward and starting from the right b. Hold the slide right side up, facing forward so the image is NOT reversed. Rotate the slide as illustrated below (180 deg) and Insert each slide, one at a time, into the magazine. ENGLISH ing the t. ed. the Loading slide(s) into the magazine Numbering Loading slide(s) into the magazine Universal Magazine a.
Load the magazine into the scanner (Continued) LKM M Turn the Compact Magazine ENGLISH (embossed letters facing up and the white stripe near the front panel of the scanner). Univer NOTE: • CS Magazine Slide order numbers printed on magazine facing towards the back of the scanner. Numbering • • • • PaximatS Magazine Slide order numbers printed on top of magazine on the right hand side towards the front of the scanner.
LKM Magazine Turn the slide tray around so the numbers face the front of the device, before inserting ENGLISH Numbering Universal Magazine NOTE: • Use only Universal Magazines with the DIN 108 label. Other magazines may result in problems and VOIDing the warranty. • Pull out the slide transport arm fully. • Gently press the orange adapter on the slide transport arm. Move the adapter on the slide transport arm to the front until it snaps in. • Push the slide transport arm back into the scanner.
ENGLISH Additional features d. S Manual Control Panel a. You can advance or reverse the slide by pressing the navigation button or and scan manually with the scan button to enable one button scan function.
d. Single Slide Scanning Load the empty magazine into the tunnel FIRST until it touches the slide transport arm completely. Slide the magazine forward to be sure that the transport arm is in the first slot of the magazine. • Press the eject button [I] to make the slide holder open exposing the loaded slide. • Place the slide as illustrated [I] into the slide holder and press the slide holder down [II]. • Open the CyberView X 5.0 driver program to scan the slide.
HOW TO SCAN SLIDES ST STEP 1 – Acquire Driver ENGLISH (For PC User) Open CyberView from Start – All Programs –CyberView (For MAC User) Open Macintosh Hard drive – Applications –CyberView STEP 2 – Select Film Type Select the film type to be scanned - Positive, Negative or B&W (Black and White). Th co o Ex 8 16 N STEP 3 – Optional Prescan Select the “Prescan Current Frame“ to prescan the slide currently loaded into the scanner or “Prescan...
de o a. Resolution The default scanning resolution is 1000dpi, additional resolution options are listed below. Notice: Higher scanning resolutions result in greater scanning time and hardisk ENGLISH e). STEP 4 – Set Scan Settings space requirements. b.
STEP 5 – Set Scan Preferences Select Scan - Preference - Film Type - Scan Setting 4. po Us ENGLISH 5. Ch sio “Prescan Resolution“ - Default pre-scan resolution. “Using default real scan resolution“ - Enables default scan resolution setting. “Color Depth“ – Default color depth while scanning. “Scan Mode“ – Default scan mode while scanning. Configuring Scan settings 1. 2. 3. 18 18 Select Browse and choose the designated folder to save the scanned image to Enter the file name.
4. Options - Use Film Index: Use the number assigned to the slide based on it’s position in the cartridge. User Defined Start Number: Enter a specific start number ENGLISH 5. Choose the file type , “TIF” or “JPG”. (TIF uncompressed or JPG CompressedChoose image quality for JPEG.
ST Adjust the scanning size as well as adjust the “Scan Offset” setting to move the image position of slide. To int ba ENGLISH Default Scanning Area Magic Touch / Auto Color Enable / disable Magic Touch and Auto Color adjustment to scans. Magic Touch is a powerful dust and scratch removal technology that does away with the hassle of learning complex and tedious software techniques.
ve STEP 6 – Scan To Scan a Single slide - Choose “Scan Current Frame” to scan the slide loaded into the scanner or “Multi-Scan…” to input the number of slides to be scanned based on their location in the magazine. ENGLISH 1. Scan Current Frame > Scan the current slide. 2. Scan Selected to File… > Scan the selected slide(s) to a specified path. 3. Multi-Scan to File… > Scan slide(s) numbers and/or range.
ENGLISH USER INTERFACE 22 22 Me
Menu Commands - Preview ENGLISH 1. Zoom In: Magnify image. 2. Zoom Out: Reduce image. 3. Rotate 90 Left: Turn the image 90° counter clockwise. 4. Rotate 90 Right: Turn the image 90° clockwise. 5. Flip Horizontal: Flip the image horizontally. 6. Flip Vertical: Flip the image vertically. 7. Revert: Discard all modifications and restores the image back to the original state in preview windows. a. Image Adjustment 1.
2. Color Balance ENGLISH To adjust the brightness, contrast, saturation, and color (CMY or RGB) of the image. Comparisons between before and after adjusted images are shown for reference. Example: If a previewed image appears too dark, use the “Brightness” slider in the “Color Balance” window to adjust the image by selecting the slider in the center and moving it to the right. The image’s “After” view becomes lighter. Select “OK” to accept the changes which will be sent to the scanning hardware.
B) es 3. Curves and Levels Adjust image settings by moving Curve and Levels settings. Comparison between before and after adjustment is displayed for reference. ENGLISH Example: When the previewed image appears to be too dark, adjustments with the Input slider in the Curves and Levels window can be made to correct the image. Selecting the Gray slider in the center and moving it to the left will result in changes in the “After” view resulting in a lighter image.
Menu Commands - Windows 1. Exposure Setting: To adjust the exposure time (R, G, B) press ”Reset” to restore to In o an ENGLISH the default setting. Fu Menu Commands - Help • • 26 26 Update: Firmware: Upgrade the firmware version, select the path where the file of firmware has been saved.
e to ver- In order to optimize scanned image quality, please select your film type and brand from the toolbar: Negative Positive (also known as Slide) Black and White ENGLISH of Function Bar Diagram Prescan: Pre-scan the current film, press drop down for more options. Scan: Scan film, press drop down button for more options. Image Adjustment: Press drop down button for more options. Backward One Frame: Moves film back one frame. Forward One Frame: Moves film forward one frame.
III. Preview the image you pre-scan, you can select the measurement unit “in“-“cm““px“ by clicking the upper-left corner. A co adju ENGLISH Preview Window The “Ap sca Status Line In the lower left hand corner, the color level (RGB: red, green, blue) Displays the RGB (Red, Green, Blue) values in the image at the current pointer location [ex: I]. The zoom scale, the current slide magazine location and how many areas selected to scan (2 or or higher indicates: Multiple scan areas on one slide [ex: II].
m“- III. Active Frame Setting Area [Floating Windows] A comprehensive advanced mode is available to allow for more user defined adjustments. ENGLISH Normal mode [ex: I] to input the basic parameter to scan (including scan resolution, film size, color depth). Advanced mode [ex: II]to input the parameter of scan and output (including scan resolution, size, color depth and output resolution, size, scan mode).
IV. Thumbnail Panel Area [Floating Windows] ENGLISH Images only appear here in Prescan mode, scan to file goes directly to the hard drive, this window remains blank as does the main Cyberview window. Displays thumbnail view of pre-scanned images. By default all pre-scanned images are selected. Note the small check mark below each image. When scanning more than 6 frames (6 at a time are viewable in the thumbnail panel) you may scroll to view more by clicking on the right arrow button.
to ew nail The left h ease. CyberView ENGLISH d TECHNICAL SUPPORT For information regarding the film scanner and CyberView driver, please visit www.reflecta.de. Transportation For safety purposes, follow the procedure below before transporting the scanner (i.e. before moving the scanner from one location to another or packing and shipping the unit): 1. Plug in the power adaptor. Turn on the power switch. 2. Wait for the scanner to warm up (around 50 seconds).
