User`s manual

ENGLISH

3. Curves and Levels

Adjust image settings by moving Curve and Levels settings.

Comparison between before and after adjustment is displayed for

reference.

Example:

When the previewed image appears to be too dark, adjustments with the Input

slider in the Curves and Levels window can be made to correct the image. Selecting the Gray

slider in the center and moving it to the left will result in changes in the “After” view resulting

in a lighter image. Once the adjusted image is acceptble select “OK” to send changes to

the scanning hardware. The same method can also be used to adjust each color channel

independently, using the channel drop down menu “RGB = All colors” R = Red, G = Green,

and B = Blue.

Menu Commands - Windows

Exposure Setting: To adjust the exposure time (R, G, B) press ”Reset” to restore

to the default setting.

Menu Commands - Help

• Update Firmware: Upgrade the  rmware version, select the path where

the  le of  rmware has been saved. (These  les may be downloaded from

our website)

• About: Display system information (including operation system, CPU),

product information (including product name, model name, hardware

version,  rmware version, software version, device information including

interface and optical resolution). This information is helpful to provide

when requesting technical support.

ENGLISH

USER INTERFACE

There are three major parts of the CyberView user interface:

I. Menu Commands [Overview + Full]

II. Function Bar Diagram / Toolbar Diagram

III. Active Frame Settings Area

I. Menu Commands [Overview]

Menu Commands - Scan

(overview)

a. Prescan

b. Scan

c. Revert

d. Preference

e. Exit / Quit

Zoom, Rotate & Flip features.

Menu Commands - Preview (overview)