User`s manual

ENGLISH

STEP 1 – Powering on the scanner

STEP 2 – Select  lm type

a. Open the CyberView scanning interface.

b. Select the  lm type to be scanned - Positive, Negative or B&W (Black and

White).

HOW TO SCAN

Status LED Scanner Status

Power on Cycle Unit will take approx. 40-50 sec. to callibrate. The power

LED will be solid blue (not blinking) to indicate that

the scanner is ready to use.

LED Status Flashing indicates the scanner is busy, do not insert/re-

move  lm holders

Flashes several times,

then a pause,

then  ashes again

Scanner is malfunctioning. Turn the unit o , close the

software, power on the scanner, wait for calibration, then

re-open CyberView.

c. Once you have selected a  lm type you will have the option to select

the frame sizes for the various 120 format  lms, after you have inser ted

the  lm holder into the unit.

NOTE: The 135  lm will be auto-detected, a frame selection is not necessary.

Scanning process step-by-step:

Powering on the scanner > Select  lm type > Optional Prescan >

> Set scan settings > Scan