User`s manual

ENGLISH
13
ENGLISH
12
3. To scan a 3rd frame in the strip you will need to remove the strip
and rotate it 180 degrees so the writing on the edges is now
inverted
NOTE: Make sure that the  lm is as  at as possible between the  lm guide
holders (see below).
ABC
ex.: curved  lm INCORRECT
ex.:  attened  lm CORRECT
4. Orient the  lm as illustrated the text on the  lm edges will read ABC.
Align the  lm with the triangle mark in the upper left corner. Close
the upper  lm guide  rst.
Loading 120  lm into the holder (contin-
ued)
• Insert the holder into the front of the scanner, pushing it in as far as it will
go.
• To release the holder, gently pull it out.
Loading 120  lm holder into scanner
ex.: correctly positioned  lm, lower left corner at the triangle
mark
ex.: incorrectly positioned  lm, not aligned with triangle mark
ABC
ABC
Note: Orientation of scanner in the diagrams is from the front of the unit. Take
note of the curved edge of the 120  lm holder also facing towards the front of
the scanner for correct orientation when loading the scanner.
13