User`s manual

ENGLISH
23
II. Preview Window Area [FixedWindows](Continued...)
a. Ejects the lm to the left
b. Reverses the lm one frame to the left
a. Advances the lm one frame to the right
b. Ejects the lm to the right
Go To... You can select which frame to move to in the strip
Image Alignment Tool
Frame adjustment tool (TABS) if your lm is miss aligned after insertion you can
use these TABS on the ruler to adjust alignment by dragging the TAB to align
with the edge of the lm frame
You can select the ruler measurement unit “in“-“cm“-“px“ by clicking the upper-
left corner.
Toolbar Diagram
Selectscanarea:more than one selection can be made at a time.
ZoomIn:To magnify the image where the cursor is currently located.
The image will be magnied with every click until the maximum
multiple (1000%) is reached.
ZoomOut:To reduce the size of the viewed image click the Zoom Out
cursor to the desired area, the image will reduce by half with every click
until the lowest multiple (25%) is reached.
Rotate90Left: To rotate the image counter clockwise 90 degrees.
Rotate90Right:To rotate the image clockwise 90 degrees.
FlipHorizontal:To Flip the image 180 degrees horizontally.
FlipVertical: To Flip the image 180 degrees vertically.
Revert: Discard all modications and restores the image back to the
original state in preview windows.