ENGLISH ENGLISH Manual CyberView X5 1
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT ENGLISH This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TABLE OF CONTENTS ENGLISH Getting Started Quick Installation Guide (QIG) Installing Software and Driver Installing Hardware Loading the slides into the Magazine Loading the Magazine into the Scanner Additional Features One Button Scan How to Scan Slides STEP 1 - Acquire Driver STEP 2- Select Film Type STEP 3 - Optional Prescan STEP 4 - Set Scan Settings STEP 5 - Set Scan Preferences STEP 6 - Scan STEP 7 - Exit User Interface I Main Window Area II Preview Window Area III Active Frame Setting Area IV Thumbna
GETTING STARTED ENGLISH Check the package content before getting started. For Quick Installation please refer to Quick Installation Guide. (Ref. Pg. 6) Important! Save the original box, receipt and packing material for future shipping needs. Package Contents t Slide Scanner. t Magazine. t Power Adapter t USB Cable t Scansoftware CyberView t Application Software Warning! Using any other power adapter may severely damage the scanner and will void the product warranty.
Operating Ambient Temperature Range 50º to 104ºF (10º to 40ºC) ENGLISH Note: Do not turn on the scanner unless it is within this temperature range. If the scanner has been stored or transported outside of this temperature range then wait till it has acclimatized before turning it on. Operating Ambient Humidity Range 15% to 76% relative humidity (non-condensing) Note: If the scanner is stored or to be transported in cold temperature and then brought into a warm / humid environment condensation may occur.
INSTALLING SOFTWARE AND DRIVER ENGLISH for PC (Windows) User Windows Systems installation during driver installation a warning dialogue box may appear, if this is the case please select “install this driver anyway.” Notice: 1. In “Found New Hardware Wizard” window, select “Search automatically or Browse computer for driver software.” 2. In “Completing the Found New Hardware Wizard” window, click “Finish”. Note: Not all PC´s will display the found new hardware window, some will install in the background.
INSTALLING SOFTWARE AND DRIVER Before Installing the Scanner Driver... ENGLISH If you choose to use the provided application for image editing, install the application software (ex: Adobe® Photoshop® Elements) by inserting the application CD into the computer’s CD/DVD drive. Follow the instructions that will be displayed in a window that opens automatically. Installing Scanner Driver a. Insert driver CD into the computer CD/DVD drive and explore the contents. b.
Loading slide(s) into the magazine General Recommendations: t ENGLISH t t t t t t y) especially for cardboard frames and framed slides up to 2-3.2mm inch thickness. Braun Paximat S (grey) for framed slides up to 2 mm Paximat Magazine (Black tray) for framed slides up to 2mm thickness. CS Magazine for CS/CS2-framed slides. Universal Magazine DIN 108 ( cardboard frames) Glass slides that are attached to glass frames may cause complications due to the hard edges.
Loading slide(s) into the magazine CS Magazine ENGLISH a. Locate the numbering sequence text on the CS slide magazine indicating the slide order. The numbers should be facing up and starting from the left. b. Hold the slide right side up, facing forward so the image is NOT reversed. Rotate the slide as illustrated and Insert each slide, one at a time, into the magazine. CS Magazine Numbering Loading slide(s) into the magazine Paximat Magazine ( white and grey) a.
ENGLISH Loading slide(s) into the magazine LKM Magazine a. Locate the numbering sequence text on the front of the LKM slide magazine indicating the slide order. The numbers should be facing forward and starting from the right b. Hold the slide right side up, facing forward so the image is NOT reversed. Rotate the slide as illustrated below (180 deg) and Insert each slide, one at a time, into the magazine. Numbering Loading slide(s) into the magazine Universal Magazine a.
Fi ng orange Adapter: 1. Push the adapter from the front onto the transport arm. Pay a en on of correct orienta on of the adapter. ENGLISH 2.
1. When using CS, LKM and Paximat Slide Tray you have to move the adapter back. ENGLISH Therefore gently press down the adapter… 4. … and push it to the end posi on 5. When using UNIVERSAL Slide Magazines you have to move the adapter to the front of the transport arm.
oad the magazine into the scanner (Continued) Compact Magazine (embossed letters facing up and the white stripe near the front panel of the scanner). ENGLISH CS Magazine Slide order numbers printed on magazine facing towards the back of the scanner. Numbering Paximat Magazine ( white and grey) Slide order numbers printed on top of magazine on the right hand side towards the front of the scanner.
LKM Magazine Turn the slide tray around so the numbers face the front of the device, before inserting ENGLISH Numbering Universal Magazine NOTE: t Use only Universal Magazines with the DIN 108 label. Other magazines may result in problems and VOIDing the warranty. t Pull out the slide transport arm fully. t Gently press the orange adapter on the slide transport arm. Move the adapter on the slide transport arm to the front until it snaps in. t Push the slide transport arm back into the scanner.
Additional features ENGLISH Manual Control Panel a. You can advance or reverse the slide by pressing the navigation button or and scan manually with the scan button to enable one button scan function. .
d. Single Slide Scanning t Load the empty magazine into the tunnel FIRST until it touches the slide ENGLISH transport arm completely. Slide the magazine forward to be sure that the rst slot of the magazine. t Press the eject button [I] to make the slide holder open exposing the loaded slide. t Place the slide as illustrated [I] into the slide holder and press the slide holder down [II]. t Open the CyberView X 5.0 driver program to scan the slide.
HOW TO SCAN SLIDES ENGLISH STEP 1 – Acquire Driver (For PC User) Open CyberView from Start – All Programs –CyberView ENGLISH (For MAC User) Open Macintosh Hard drive – Applications –CyberView STEP 2 – Select Film Type lm type to be scanned - Positive, Negative or B&W (Black and White). STEP 3 – Optional Prescan Select the “Prescan Current Frame“ to prescan the slide currently loaded into c positions in the magazine.
STEP 4 – Set Scan Settings a. Resolution The default scanning resolution is 1000dpi, additional resolution options are listed below. space requirements. ENGLISH b.
STEP 5 – Set Scan Preferences ENGLISH ENGLISH Select Scan - Preference - Film Type - Scan Setting “Prescan Resolution“ - Default pre-scan resolution. “Using default real scan resolution“ - Enables default scan resolution setting. “Color Depth“ – Default color depth while scanning. “Scan Mode“ – Default scan mode while scanning. guring Scan settings 1. Select Browse and choose the designated folder to save the scanned image to le name.
4. Options - Use Film Index: Use the number assigned to the slide based on it’s position in the cartridge. c start number ENGLISH le type , “TIF” or “JPG”. (TIF uncompressed or JPG Compresseders the least amount of compres- ENGLISH sion Advanced Setting nd the correct exposure to get the widest range of whites and blacks while putting the middle grays at around the middle of the data range. ”Auto Balance” - Using the image histogram to balance RGB channels.
Default Scanning Area set” setting to move the image position of slide. ENGLISH Magic Touch / Auto Color Enable / disable Magic Touch and Auto Color adjustment to scans. Magic Touch is a powerful dust and scratch removal technology that does away with the hassle of learning complex and tedious software techniques. Being hardware-based, it works seamlessly with the scanning process to ensure the best possible results when bringing images into the computer.
STEP 6 – Scan ENGLISH To Scan a Single slide - Choose “Scan Current Frame” to scan the slide loaded into the scanner or “Multi-Scan…” to input the number of slides to be scanned based on their location in the magazine. 1. Scan Current Frame > Scan the current slide. ed path. 3. Multi-Scan to File… > Scan slide(s) numbers and/or range.
USER INTERFACE ENGLISH 23
Menu Commands - Preview ENGLISH 1. Zoom In: Magnify image. 2. Zoom Out: Reduce image. 3. Rotate 90 Left: Turn the image 90° counter clockwise. 4. Rotate 90 Right: Turn the image 90° clockwise. 5. Flip Horizontal: Flip the image horizontally. 6. Flip Vertical: Flip the image vertically. 7. Revert cations and restores the image back original state in preview windows. a. Image Adjustment erent views of image with options changes to highlights, midtones, etc.
2. Color Balance To adjust the brightness, contrast, saturation, and color (CMY or RGB) of the image. Comparisons between before and after adjusted images are shown for reference. ENGLISH Example: If a previewed image appears too dark, use the “Brightness” slider in the Color Balance” window to adjust the image by selecting the slider in the center and moving it to the right. The image’s “After” view becomes lighter. Select “OK” to accept the changes which will be sent to the scanning hardware.
3. Curves and Levels ENGLISH Adjust image settings by moving Curve and Levels settings. Comparison between before and after adjustment is display reference. Example: When the previewed image appears to be too dark, adjustments with the Input slider in the Curves and Levels window can be made to correct the image. Selecting the Gray slider in the center and moving it to the left will result in changes in the “After” view resulting in a lighter image.
Menu Commands - Windows 1. Exposure Setting: To adjust the exposure time (R, G, B) press ”Reset” to restore to the default setting. ENGLISH Menu Commands - Help t Update: t About: Displays system information (including operation system, CPU), product rmware version, software version, device information including interface and optical resolution). .
Function Bar Diagram lm type and brand from the toolbar: ENGLISH Negative Positive (also known as Slide) Black and White Prescan: Scan: lm, press drop down for more options. lm, press drop down button for more options. Image Adjustment: Press drop down button for more options. Backward One Frame: Forward One Frame: lm back one frame. lm forward one frame. Reload Magazine: Reset the frame number, the location number will be returned to 1.
Function Bar Diagram lm type and brand from the toolbar: Prescan: Scan: ENGLISH Negative Positive (also known as Slide) Black and White lm, press drop down for more options. lm, press drop down button for more options. Image Adjustment: Press drop down button for more options. Backward One Frame: Forward One Frame: lm back one frame. lm forward one frame. Reload Magazine: Reset the frame number, the location number will be returned to 1.
III. Active Frame Setting Area [Floating Windows] ned adjustments. ENGLISH Normal mode [ex: I] to input the basic parameter to scan (including scan lm size, color depth). Advanced mode [ex: II]to input the parameter of scan and output (including scan resolution, size, color depth and output resolution, size, scan mode). The “Active Frame Setting” only imitates in the current preview image, click “Apply to All” to set parameters in all previewed images, does not apply to di le.
IV. Thumbnail Panel Area [Floating Windows] le goes directly to the hard drive, this window remains blank as does the main Cyberview window. ENGLISH Displays thumbnail view of pre-scanned images. By default all pre-scanned images are selected. Note the small check mark below each image. When scanning more than 6 frames (6 at a time are viewable in the thumbnail panel) you may scroll to view more by clicking on the right arrow button.
TECHNICAL SUPPORT ENGLISH CyberView 32
