User Manual-Dual litering

www.reflecmedia.com
To remove the battery, ensure that he controller is switched off (i.e. toggle switch in the centre-off
position), depress the locking tab and slide the battery out of its holder.
The ‘default’ supply is from the XLR / mains input. If the mains input AND battery are connected
then the unit will automatically run from the XLR / mains input. For safety reasons, because of the
many battery technologies available, the LiteRing Controller will not charge the battery, even if
connected!
NB – Reflecmedia do not provide batteries but these are available from many sources.
If the XLR plug, socket or M-DV battery adapter is damaged, return the unit to your Reflecmedia
dealer for repair.
Operating the Dual LiteRing & Dual LiteRing Controller
Once the LiteRing and power supply are connected to the LiteRing Controller, the LiteRing is ready
for operation.
The toggle switch on the face of the controller allows the user to switch between different LiteRing
colours, Blue or Green.
Note – The controller will remember the last dimmer setting for the Blue & Green channels
independently, even when disconnected from the power source, to allow the user fast set up and
change over between LiteRing colours.
Indicator LEDs will glow to confirm to the user which channel is in operation
The intensity of the LiteRing is altered by depressing the two arrow shaped buttons.
SONY NP
-
F Mini DV type
Battery holder
UP = Green
LiteRing
Centre = OFF
DOWN = Blue
LiteRing
Battery attached