User Manual-Dual litering

www.reflecmedia.com
The ‘UP’ arrow increases the LiteRing intensity; the ‘DOWN’ arrow decreases the LiteRing intensity.
The light output can be very finely controlled in 256 discreet steps (i.e. values of 0 to 255).
The chosen output level is shown on the upper left of the LCD display, along with an approximation
of the output as a % (0 – 100%) on the upper right.
The LCD display will also indicate the actual supply voltage present, bottom right, and the source of
the supply, bottom left. The display will indicate BX to warn the user that the battery voltage has
dropped below 7V and will require charging soon.
Mounting the Litering Controller
When powered by battery the LiteRing Controller will sit on a flat surface in an ‘upright position.
Additionally, the LiteRing Controller may be hung from a belt or similar. A velcro stip or similar can
be threaded behind the metal bars on either side of the controller housing.
NOTE – Never hang the controller on the camera user or other person unless the controller is
powered by the MDV battery. There is a risk that the user may trip on the mains power supply.
M = XLR / mains input
B = Mini DV battery input
BX = Mini DV battery input – low battery voltage warning (6V)
‘Digital’ output level
000 to 255
Approximate % output level
0 to 100%
UP = Increase
LiteRing
intensity
DOWN = Blue LiteRing intensity
Actual i
nput Voltage (dc)