User Manual

  
 


Quick Start
1. Position your talent a minimum of 10ft/3metres from you camera. The talent should be a distance of 3 to 4ft from
the Chromatte.
2. Light your talent and not the Chromatte. Large amounts of spill light on to the Chromatte will create hard shadows
and can cause the blue/green from the LiteRing to be bleached out. For further lighting assistance please refer to
'lighting set-up' on page 11.
3. White balance the camera before turning the LiteRing on. For further assistance regarding your camera,
please refer to 'setting the cameras white balance' on page 10
4. Turn on the LiteRing until the Chromatte appears as an evenly coloured blue or green. This will be visible on your
preview monitor. If you are not using a preview monitor, increase the intensity of the LiteRing until there is no blue
or green spill on the talent.
5. If there is blue or green spill from the LiteRing on the talent then you will need to turn the LiteRing's intensity
down.
6. Subtle adjustments to both the Iris and the LiteRing Controller will enhance your results.


300w Back light
 
650w Key light
Soft light to Fill
Chromatte Curtain
Single Person Set-up
NOTE: Tungsten, Halogen and Fluorescent lights can be used although colour temperatures will differ.