User Manual

  
 





Each Back light
contains a half scrim.
Soft light to Fill
Two Person Set-up
Before you start to light ensure the camera is set up as follows
Iris - manual
Gain - 0db
ATW - off
White balance preset or manual white balance
Setting the cameras white balance
1. Ensure the LiteRings are switched off
2. Make sure there are no coloured gels on the lights at this time
3. If you are using dimmers to control your lights, then set the faders for the key light you use for white balancing
to 70% (all lights should be set to this nominal value for initial lighting).
4. Focus the camera onto a reference white (a test chart / white paper)
5. Light the white card evenly with your key light
6. Use the iris to expose the card correctly
7. Press the auto white button or select manual white balance from the menu
If for any reason you alter the white balance, go through the above process again ensuring the light you use does not
have any coloured gels on and that all other lights are switched off.
!
FAILURE TO SET THE WHITE BALANCE WHILST THE LITERING IS OFF WILL CAUSE THE BLUE OR GREEN
COLOURED BACKGROUND TO INFLUENCE FOREGROUND COLOUR OF THE OBJECT/PERSON.