POWERMAX 600 REFRIGERANT RECOVERY SYSTEM www.thermaflo.cc OPERATIONS MANUAL VERSION 2.
I.T.S. Thermaflo would like to thank you for selecting the OZ-PowerMax Recovery System. Your PowerMax recovery unit, like all THERMAFLO products, has gone though extensive testing to assure the highest degree of quality. THERMAFLO backs up this claim of quality with a comprehensive service program and a full warranty. The people at THERMAFLO have put a great deal of time, effort and pride in producing this product.
STANDARD RECOVERY 1. 2. 3. 4. 5. 6. 7. 8. SET UP CONNECT POWER CORD AND SAFETY CABLE OR TEST PLUG. CONNECT CENTER HOSE OF MANIFOLD TO INLET FILTER. CONNECT HOSE ON DISCHARGE PORT TO LIQUID PORT ON TANK. CLOSE INLET VALVE (V1). TURN CONTROL VALVE (V2) TO RECOVER POSITION. OPEN DISCHARGE VALVE (V3). OPEN HIGH SIDE OF SERVICE MANIFOLD. OPEN LIQUID SIDE OF RECOVERY TANK. OPERATION 1. TURN POWER ON AND PRESS START BUTTON. 2. SLOWLY OPEN INLET PORT (V1). 3. ONCE LIQUID IS RECOVERED OPEN LOW SIDE OF MANIFOLD. 1.
SELF EVACUATION 1. 2. 3. 4. 5. SET UP CONNECT HOSES AS SHOWN BELOW. CLOSE INLET VALVE (V1). TURN CONTROL VALVE (V2) TO SELF-EVAC POSTION. OPEN DISCHARGE VALVE (V3). OPEN LIQUID VALVE ON THE RECOVERY TANK. 1. 2. 3. OPERATION TURN POWER ON AND PRESS START BUTTON. SUCTION GAUGE WILL THEN GO INTO A VACUUM. SELF-EVACUATION PROCESS IS COMPLETED. 1. 2. 3. SHUT DOWN CLOSE LIQUID VALVE ON RECOVERY TANK. CLOSE DISCHARGE VALVE (V3). TURN POWER SWITCH OFF. VAPOR RECOVERY 1. 2. 3. 4. 5.
PUSH / PULL RECOVERY TANK TO TANK TRANSFER (LIQUID RECOVERY FOR 20 LBS. OR MORE) 1. 2. 3. 4. 5. 1. 2. 3. 1. 2. 3. 4. 4 SET-UP CONNECT HOSES AS SHOWN BELOW. CLOSE INLET VALVE (V1). TURN CONTROL VALVE (V2) TO RECOVER POSTION. OPEN DISCHARGE VALVE (V3). OPEN LIQUID & VAPOR VALVES ON THE RECOVERY TANK. OPERATION TURN POWER ON AND PRESS START BUTTON. SLOWLY OPEN INLET VALVE (V1). ONCE ALL LIQUID HAS BEEN RECOVERED, GO TO VAPOR RECOVERY (FIG 2).
PUSH / PULL RECOVERY TANK TO TANK TRANSFER (LIQUID RECOVERY FOR 20 LBS. OR MORE) 1. 2. 3. 4. 5. 1. 2. 3. 1. 2. 3. 4. 4 SET-UP CONNECT HOSES AS SHOWN BELOW. CLOSE INLET VALVE (V1). TURN CONTROL VALVE (V2) TO RECOVER POSTION. OPEN DISCHARGE VALVE (V3). OPEN LIQUID & VAPOR VALVES ON THE RECOVERY TANK. OPERATION TURN POWER ON AND PRESS START BUTTON. SLOWLY OPEN INLET VALVE (V1). ONCE ALL LIQUID HAS BEEN RECOVERED, GO TO VAPOR RECOVERY (FIG 2).
SELF EVACUATION 1. 2. 3. 4. 5. SET UP CONNECT HOSES AS SHOWN BELOW. CLOSE INLET VALVE (V1). TURN CONTROL VALVE (V2) TO SELF-EVAC POSTION. OPEN DISCHARGE VALVE (V3). OPEN LIQUID VALVE ON THE RECOVERY TANK. 1. 2. 3. OPERATION TURN POWER ON AND PRESS START BUTTON. SUCTION GAUGE WILL THEN GO INTO A VACUUM. SELF-EVACUATION PROCESS IS COMPLETED. 1. 2. 3. SHUT DOWN CLOSE LIQUID VALVE ON RECOVERY TANK. CLOSE DISCHARGE VALVE (V3). TURN POWER SWITCH OFF. VAPOR RECOVERY 1. 2. 3. 4. 5.
STANDARD RECOVERY 1. 2. 3. 4. 5. 6. 7. 8. SET UP CONNECT POWER CORD AND SAFETY CABLE OR TEST PLUG. CONNECT CENTER HOSE OF MANIFOLD TO INLET FILTER. CONNECT HOSE ON DISCHARGE PORT TO LIQUID PORT ON TANK. CLOSE INLET VALVE (V1). TURN CONTROL VALVE (V2) TO RECOVER POSITION. OPEN DISCHARGE VALVE (V3). OPEN HIGH SIDE OF SERVICE MANIFOLD. OPEN LIQUID SIDE OF RECOVERY TANK. OPERATION 1. TURN POWER ON AND PRESS START BUTTON. 2. SLOWLY OPEN INLET PORT (V1). 3. ONCE LIQUID IS RECOVERED OPEN LOW SIDE OF MANIFOLD. 1.
I.T.S. Thermaflo would like to thank you for selecting the OZ-PowerMax Recovery System. Your PowerMax recovery unit, like all THERMAFLO products, has gone though extensive testing to assure the highest degree of quality. THERMAFLO backs up this claim of quality with a comprehensive service program and a full warranty. The people at THERMAFLO have put a great deal of time, effort and pride in producing this product.
