User Manual

English Instruction Manual DIGIMON-SE / DIGIMON4

Resetting pressure sensors

By pressing the and buttons the DIGIMON pressure displays are

reset to zero, in order to avoid incorrect measurement values.

To obtain a correct measurement value on the display, the DIGIMON

should not be reset when pressurised or under a vacuum.

Factory settings

 Set the DIGIMON to the "Digital display" screen.

 Press the and buttons at the same time for 5 seconds.

Display shows - - - - - - - -

 Press the button to exit.

Resetting the external vacuum sensor

 Switch off the DIGIMON

 Connect vacuum sensor

 Hold down the button and switch on the device using the

button.

Display shows VAC-ZERO

 Press the button to exit  display shows End.

 The device can be switched on using the button and is ready for

operation once again.

ON/OFF

SET

ON/OFF

VAC

SET

VAC

LIGHT

SET