User Manual

ManualsBrandsREEXBON ManualsBar Code ScannersBluetooth Barcode Scanner, Handeld 2.4GHz Wireless Bar Code Scanners with Charging Cradle USB Automatic Accurate Scan Barcode Code Reader

V1.0

Wireless Barcode

Scanner Manual

Precautions

Please read the Instructions carefully before

using the barcode scanner. It is recommended

to keep this manual for reference.

Technical ParameterProduct packaging

Scanner type

Light source

CPU

Resolution

Motion tolerance

Depth of field

Scan mode

Scan angle

Print contrast

Wireless

Storage

Battery Capacity

Charging time

Continuous working time

Communication mode

Power supply

Operating temperature

Storage temperature

Humidity

Certificate

CMOS

white LED + Red LED

32bit

640*480

25cm/s

30mm ~ 500mm

Manual, Auto-sensing

Roll：±360°, Pitch：±60°, Skew：±70°

≥25%

2.4GHz (Max 150m), Bluetooth (Max 30m)

16Mb

2200mAh

Approx. 3 hours

≥16 hours

USB, Wireless 2.4G, Wireless Bluetooth 4.2

DC 5V@200mA(work)

-20℃ to 55℃

-20℃ to 60℃

5% to 95%（non-condensing）

FCC, RoHS, CE

Led & Buzzer STATE DESCRIPTION

Blue LED ON

Red LED ON

No light ON

A long beep

A short beep

5 short beeps

3 short beeps

Scanner ON and connected

Charging

Scanner not connected to any device

Power ON/OFF

Scan common barcode, paired, or Wireless

connection success

Battery without electricity

Wireless disconnection

.........

..........

............

..........

........

Restore factory default

Version information

Battery level

Wireless mode

2.4G pairing (default)

Turn on scanner by pressing the button. Plug the USB dongle into

a USB port on the computer. Wait few seconds for a beep from

scanner, then 2.4G paired automatically.

Once the scanner is connected to a Bluetooth device, and want to

go back to 2.4G dongle mode, Please follow the steps below:

Storage mode

If the scanner is working in a place beyond the wireless

transmission range. It’s recommended to use the “Storage Mode”,

all of the scanned data will be stored in the scanner memory

automatically.

Bluetooth HID pairing:

Press the scanner button for 8 seconds. The blue light on and

scanner will start flashing. You can turn on the Bluetooth device of

your mobile or PC, search for “Barcode scanner HID”and then click

pair.

Alternatively, you can also connect scanner via Bluetooth by

reading configuration barcode:

1. Enter 2.4G mode

2. pair with USB dongle

3. Plug the USB dongle back into PC/laptop When blue light starts

flashing.

1. Enter Bluetooth HID mode

2. Pair with bluetooth

3. After reading the 2 barcodes above, the blue light on scanner will

start to flash. Then you turn on the bluetooth device of your mobile

or PC, search for ”Barcode scanner HID“and click PAIR.

1. Bluetooth SPP

1. Enter Storage mode

2. Upload data

All of the stored data can be transmitted to your device by reading

barcode below.

*only works in Bluetooth/2.4G signal range.

3. Sum data

You can check the number of barcodes stored in scanner memory.

4. Clear data

Delete all barcodes stored in the scanner memory by reading the

barcode below.

2. Bluetooth BLE

Other bluetooth mode:

Wireless Transmitting mode

3. Pair with bluetooth

Normal mode (default)

Transission Speed Setting (For Bluetooth mode)

Sound setting

Sleep interval time

Suffix setting

Hidden Character Settings

IOS keyboard settings

Language Settings

Fast (default) Middle volume

High volume (default)Medium

Low

Very low

Turn sound off

Low volume

Sleep interval 30s

Sleep interval 1min

Sleep interval 2min

Sleep interval 5min

Sleep interval 10min

Sleep interval 30min

Never Sleep

Sleep Immediately

English

Germany

French

Spanish

Italian

Japanese

Belgian

International general keyboard

Add CR (default)

Add TAB

Hide front part of barcode digits

Hide back part of barcode digits

Remove suffix

1. Select the characters that need to hide front part or back

part of the barcode.

2. Select how many digits you want to hide.

Hide 1 bit

Hide 2 bits

Hide 3 bits

Hide 4 bits

Read below barcode to Enable /disable iphone keyboard

It scans codes automatically when movement is detected.

Scan mode setting

Manual mode

Auto-sensing mode

Enable all the 1D barcodes

Disable all the 1D barcodes

Enable all the 2D barcodes

Disable all the 2D barcodes

All capital letters

All lowercase letters

Cancel uppercase/lowercase settings

Barcode type setting

Letter conversion setting

Read below options to change letter cases of the scanned

barcode data.

Example: the barcode data is “ABC123abc”

All capital letters = ABC123ABC

All lowercase = acb123abc