Owners manual

Vehicle Forward

Figure 5

Any hardware shown in

Figure 1, but not

described in table below

were supplied with

30153 kit.

Installation Instructions

REESE

CUSTOM QUICK INSTALL MOUNTING KIT

FOR 30153 REESE

RAILS ONLY

2007 & Up “New Body Style” 1500 GMC Pickups

WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing capacity.

READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION

REESE

Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame.

10 BOLT INSTALLATION

Equipment Required:

Fastener Kit: 56007F

Wrenches: 3/4”, 15/16”

Drill Bits: 1/8”, 9/16”

Other Tools: Center Punch, Measuring Tape, 3/8” Allen

Head Socket

Part Number:

56007

# Description QTY # Description QTY

1 Driver Side Mounting Bracket 1 7 1/2"-13 Hex Nut 4

2 Passenger Side Mouting Bracket 1 8 1/2" Concial Washer 4

3 5/8"-11 Hex Nut 2 9 1/2"-13 X 5.5" Gr. 8 Carriage Bolt 4

4 5/8" Concial Washer 2 10 Reinforcement Block 4

5 Angle Bracket 1 11 5/8" Pull Wire 2

6 5/8"-11 Gr. 8 Button Head Cap Screw 2

Sheet 5 of 7

Depending on Truck

Model, Reinforcement

Block Location

Could Change

- Printed in Mexico