Owners manual

© 2014, 2015 Cequent Performance Products 56007N 3-27-15 Rev. D
Vehicle Forward
Figure 4a
Inside driver side frame rail
Inner Driver
side frame rail
Plug
Loosen two
flange bolts
Figure 4c
Figure 4b
Outside driver side frame rail
Figure 3
Angle Bracket
(Included)
Any hardware shown in
Figure 1, but not
described in table below
were supplied with
30153 kit.
Installation Instructions
REESE
®
CUSTOM QUICK INSTALL MOUNTING KIT
FOR 30153 REESE
®
RAILS ONLY
1999-2007 “Classic” -1500/2500 Light Duty GM Pickups
WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing capacity.
READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION
REESE
®
Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame.
10 BOLT INSTALLATION
Equipment Required:
Fastener Kit: 56007F
Wrenches: 15/16”
Drill Bits: 1/8”, 9/16”
Other Tools: Center Punch, Measuring Tape, 3/8” Allen
Head Socket
Part Number:
56007
1
2
3
3
7
6
4
4
5
8
9
# Description QTY # Description QTY
1 Driver Side Mounting Bracket 1 6 5/8"-11 Gr. 8 Button Head Cap Screw 2
2 Passenger Side Mouting Bracket 1 7 5/8"-11X2.5 Gr. 8 Carriage Bolt 2
3 5/8"-11 Hex Nut 4 8 Carriage Block 2
4 5/8" Concial Washer 4 9 5/8" Pull Wire 4
5 Angle Bracket 1 10 5/8” Flat Washer 2
Sheet 3 of 7
- Printed in Mexico