Owners manual

Installation Instructions

CUSTOM QUICK INSTALL MOUNTING KIT

Ford Super Duty F-250/F-350/F-450

Part Number:

50026

WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing

capacity.

READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION

Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame..

Equipment Required:

Fastener Kit: 50026F

Wrenches: 3/4, 7/8, 15/16, 15 mm, 18mm

Drill Bits: 1/8”, 9/16”

Other Tools: Center Punch, Measuring Tape

Sheet 1 of 4 50026N 3/1/2016 Rev. A

All Fasteners

Typical Both Sides

Fasteners listed below are supplied with this kit, all other mentioned

fasteners are supplied with rail kit.

Item

Description Quantity

1 SPACER 1/4" x 1 1/2" x 2" 8

2 BOLT AND WASHER M14 X 45 4

3 NUT AND RETAINER M14 4

4 WASHER FLAT 1/4" (See FIG. 1c) 2

5 NUT, NYLOK 1/4"-20 (See FIG. 1c) 1

6 BOLT, HEX HEAD 1/4"-20 x 1 1/4" GRADE 2 (See FIG. 1c) 1

7 L-BRACKET (See FIG. 1c) 1

8 SPACER 1/4" x 1 " x 3" 2

Vehicle Forward

Figure 1

Driver’s side frame bracket

USE THIS HOLE ON PASSENGERS SIDE