Installation Manual

z 2006,2007,2008,2009,2010,2011,2012,2013, 2014 Cequent Performance Products, Inc.
Made in China
30035IN 10/20/2014 Rev. T
Chevrolet 73 to 87 / 73 to 92 4-door (GMC) (34” Straight, with Inside Shock Absorbers)
Side Bracket
Front
of
Vehicle
* Optional weld
pattern
Drivers side of 1/2 ton Chevy Shown
King Pin Center approx.. 3-1/2”
forward of Axle Center
1/4 1.5-3
1/4 2
*
DO NOT Torque to 85lb-ft
(tighten but do not crush bed sill)
1/4 2
1/4 2
*
Long bracket Short bracket
ROW 1
ROW 2 ROW 3
ROW 4
Axle Center
Bed Sill
CAUTION!
Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
CAUTION!
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
CEQUENT PERFORMANCE PRODUCTS, INC. does its best to communicate tow vehicle manufacturer changes; however, it is
ultimately the responsibility of the installer to prevent damage due to installation.
SHEET 8 0F 19
34-7/8” Long Box
and Short Box
Rear Edge of
Truck Bed
Measure from Rear Edge of truck
bed to rear edge of base rail.
NOTE:
Must install center bolt in
one of the center holes in
each rail.
Check to make sure center
bolt does not interfere with
bed sill.
Front of
Vehicle