Installation Manual

z 2006,2007,2008,2009,2010,2011,2012,2013, 2014 Cequent Performance Products, Inc.
Made in China
30035IN 10/20/2014 Rev. T
DODGE THROUGH 93 (FULL SIZE)
Side Bracket
*
Optional weld
pattern
Drivers side of 1/2 ton Ram Shown
1/4 1.5-3
1/4 2
*
1/4 2
1/4 2
*
Long bracket
Short bracket
King Pin Centered over Axle
Axle Center
Bed Sill
CAUTION!
Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
IMPORTANT NOTES FOR THIS INSTALLATION:
1. May need to move base rail location +/- 1/2” to ensure frame brackets do not interfere with bed sills.
CAUTION!
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
CEQUENT PERFORMANCE PRODUCTS, INC. does its best to communicate tow vehicle manufacturer changes; however, it is
ultimately the responsibility of the installer to prevent damage due to installation.
29-5/8” Long Box
and Short Box
Front
of
Vehicle
Rear Edge of
Truck Bed
Measure from Rear Edge of truck
bed to rear edge of base rail.
ROW 1
ROW 2
ROW 3 ROW 4
SHEET 14 0F 19
NOTE:
Must install center bolt in
one of the center holes in
each rail.
Check to make sure center
bolt does not interfere with
bed sill.
Front
of
Vehicle