Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1590238
Material Safety Data Sheet
6. Accidental Release Measures
Personal precautions:
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation
Protective equipment:
No data available.
Emergency procedures:
Remove ignition sources, evacuate area. Sweep up using a method that does not generate dust. Collect as much of the spilled
material as possible, placed the spilled material into a suitable disposal container. Keep spilled material out of sewers, ditches
and bodies of water.
Environmental precautions:
Do not allow material to be released to the environment without proper governmental permits.
Methods and materials for containment and cleaning up:
All waste must refer to the United Nations, the national and local regulations for disposal.
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7. Handling and Storage
Precautions for safe handling:
Consumption of food and beverage should be avoided in work areas. Wash hands with soap and water before eating, drinking.
Ground containers when transferring liquid to prevent static accumulation and discharge.
Information about fire and explosion protection:
Batteries may explode or cause burns, if disassembled, crushed or exposed to fire or high temperatures. Do not short or install
with incorrect polarity.
Conditions for safe storage, including any incompatibilities:
Requirements to be met by storerooms and receptacles
Store in a cool, dry, well-ventilated place.
Information about storage in one common storage facility
Keep away from heat, avoiding the long time of sunlight.
Further information about storage conditions
Keep container tightly sealed.
Specific and use
No data available.
Page 6 of 13