Instructions

QUICK START V1.0

IN THE BOX

14.8V 4S Li-Po

Aircraft Remote Controller Propeller Pairs

User Manual

Motor Mount Mushroom Antenna

Battery Charger

1. Camera

2. ESC & ESC Cover

3. Motor Cover/Landing gear

4. Clockwise motor

5. Counterclockwise motor

6. Clockwise propeller

7. Counterclockwise propeller

8. 5.8 GHz Video transmitter

9. Receiver

10. Flight controller

11. Power panel

12. 14.8V 1300mAH 60C 4S Li-Po

13. LED lights ( Former Blue, Red after )

The chassis is created using CFP for outstanding crash survivability.

Advanced 5.8G live video, for an unforgeable visual FPV experience.

Modern industrial and modular design, improves the product performance

and permit easy maintainance and upgrades.

The X-220 employs a modern ﬂight control system for acrobac ﬂight

rounes such as roll, ﬂip and race course moves.

ABOUT AIRCRAFT ABOUT REMOTE CONTROLLER

Mode key

Buzzer switch Motor lock key

User Manual V1.0

PAGE 1
IN THE BOX Aircraft Remote Controller Propeller Pairs QUICK START V1.0 X2 X2 User Manual Battery Charger User Manual V1.0 14.8V 4S Li-Po Motor Mount Mushroom Antenna X4 ABOUT AIRCRAFT ABOUT REMOTE CONTROLLER The chassis is created using CFP for outstanding crash survivability. Modern industrial and modular design, improves the product performance and permit easy maintainance and upgrades. Advanced 5.8G live video, for an unforgettable visual FPV experience.
PAGE 2
Connect the power socket to an appropriate mains socket via the supplied power cable. The Power LED lights up green when the charger is ready for operation. Connect the rechargeable battery to be charged via its XH balancer plug with the relevant jack of the charger. At that, observe the correct polarity of the XH plug. When connecting, do not use excessive force; always use a socket matching the jack. Only connect a single battery to the charger at a time. Always use only one of the XH sockets at a time.