Instructions

41
b) Mounting the Fin
• Pull off the protective foil from the adhesive strips (1)
onthebottomofthen(2)andinsertthenunitfrom
above into the elevator unit (3) or the groove on the fu-
selage (4).
• Thenunitmustconnectgap-freewiththeelevatorunit
(5) and both parts must be aligned at a 90° angle to-
wards each other (see sketch).
• Nowsuspendtheforkhead(6)ofthenunitcontrolrod
in the central boring of the rudder lever (7).
Figure 6