Instructions

35
c) Before operation
• Check the function safety of your model and of the remote control system. Pay attention to visible dam-
ages such as broken plug-in connections or damaged cables. All movable parts on the model have to be
smooth running; however, there must be no tolerance in the bearing.
• Chargetheightbattery,whichisnecessaryforoperation,aswellastherechargeablebatteryneeded
in the remote control according the instructions indicated by the manufacturer.
• Ifbatteriesareusedforthepowersupplyofthetransmitter,makesurethatthereisasufcientrest
capacity (battery checker). If the batteries are empty, always replace the complete set, never individual
cells only.
• Before each operation, control the settings of the trim slider at the transmitter for different steering direc-
tions and, if necessary, set them.
• Alwaysswitchthetransmitteronrst.Itisonlyafterwardsthatyoumayconnecttheightbatteryofthe
model or switch the model on. Otherwise unexpected reactions of the electric model airplane may occur
and the propeller can start to turn unintentionally!
• Check the correct and secure position of the propeller before each operation.
• Make sure that neither objects nor body parts are in the rotating and suction area of the propeller while
it is rotating.
d) During Operation
• Do not take any risks when operating the product! Your own safety and that of your environment is solely
down to you being responsible when dealing with the model.
• Improper operation can cause serious damage to people and property! Therefore, during operation,
ensureasufcientsafetydistancetopersons,animalsandobjects.
• Select an appropriate site for the operation of your model airplane.
• Flyyourmodelonlyifyourabilitytorespondisunrestricted.Theinuenceoftiredness,alcoholormedi-
cine can cause incorrect responses.
• Do not direct your model towards spectators or towards you.
• Motor,ightcontrolsystemandightbatterycanheatduringoperationofthemodel.Therefore,takea
breakof5-10minutesbeforere-chargingtheightbatteryorbeforere-startingwithapossiblyexisting
spareightbattery.Thedriveenginemustcooldowntoambienttemperature.
• Always leave the remote control (transmitter) turned on, as long as the model is in operation. After land-
ing,alwaysdisconnecttheightbatteryrstorswitchthemodeloff.Itisonlyafterwardsthattheremote
control may be turned off.
• Incaseofafaultoramalfunction,correctthefaultrstthenre-startthemodel.
• Don’t expose your model and the remote control for a longer period of time to direct sunlight or exces-
sive heat.
• Afteruse,theightbatterymustbedisconnectedfromthemodelandthetransmitterswitchedoff.Re-
move the batteries from the transmitter for extended storage.