Instructions

41
j) Controlling the Vehicle
Operate the throttle/braking lever for the drive function at the transmitter very cautiously and do not drive
too fast at the beginning until you get used to the car‘s reactions. Do not make any quick and jerky move-
ments with the operating elements of the remote control.
If the vehicle tends to pull towards the left or the right, set the steering trim on the transmitter accordingly.
When switching between forward and reverse driving, the throttle/brake lever must be put in the neutral position (neu-
tralposition=letgooflever,donotmoveit)briey(approx.1-2seconds).Ifthethrottle/brakeleverismovedfrom
forward to reverse directly, the brake function of the drive is activated (vehicle will NOT reverse).
 Thefollowingguresareonlytoillustratethefunctionsanddonotnecessarilycorrespondtothedesignof
the transmitter provided!
1. Release throttle/braking lever, vehicle rolls to a halt (or does not move, if required, correct trimming), lever is in
neutral position
2. Drive forwards, slowly pull the throttle/brake lever towards the handle
3. Driveforwardsandthenbrake(vehicleslowsdown;itdoesnotrolltoahaltslowly);pushthrottle/brakeleveraway
from the handle without stopping
4. Driveforwardsandthengointoreverse(waitbrieybetweenthechange(approx.1-2seconds)andleavethe
throttle/brake lever in its neutral position!)
  Waitbriey