Instructions

45
Whenswitchingbetweenforwardandbackwarddriving,thethrottle/brakelevermustbebriey(about1second)inthe
neutral position (neutral position = release lever, do not move it). If the throttle/brake lever is pulled straight, without
pausing, from forward to backward driving, the braking function of the drive (the vehicle does NOT move backward)
occurs.
When the drive battery is empty, be sure to wait at least 5 - 10 minutes, until the motor and the speed controller have
cooleddownsufciently.Startanewdriveonlywithafullychargeddrivebattery.
 Thefollowingimagesareonlyforillustrationpurposesofthefunctions;theydonotneedtocoincidewith
the design of the supplied transmitter.
1. Releasethegas/brakelever,thevehiclerollsout(ordoesnotmove;ifnecessary,correctthetrimming),leverisin
neutral position
2. Drive forward, slowly pull the throttle/brake lever towards the handle
3. Driveforwardandthenstop(vehicledecelerates;doesnotrolloutslowly),pushthegas/brakeleverawayfrom
the handle, without pausing
4. Driveforwardandbackward(betweentheshiftwaitafewseconds(approximately1-2seconds)andputthe
throttle/brake lever in the neutral position!)
  Waitbriey