Instructions

69
h) Motor Timing
Thissettinginuences motorrunningcharacteristics(similarto earlyignitionof acombustionengine).Changing
motor timing changes very many parameters, including the power values. Therefore, also observe compliance with
themotorandightcontrollerspecications.Alsoobservethetemperaturesofthecomponentsnamedinoperation.
Ifyoudonothavethecorrespondingspecialistknow-howandmatchingmeasuringequipment,werecommendthe
factory settings. In this setting, the best setting used for the motor is automatically set.
The motor timing can be programmed as follows:
• Switch the transmitter on and then put the throttle lever for motor control to the full throttle position.
• Thenconnecttheightbatterytotheightcontrolleragain.
• Theightcontrollerwillswitchtoprogrammingmodeaftervarioussignalsoundsandstartwiththerstprogram-
ming item, "Motor brake". This is indicated by a brief signal sound. Wait until you hear a long signal sound and a
shortsignalsound.Nowpullthecontrolleverforthemotorcontrolbackalltheway(position"Motoroff").
• Theightcontrollersignalsthesettingoptionswithanendlessloop:
- 1 signal sound = low timing (3.75°)
- 2 signal sounds = medium timing (15°)
- 3 signal sounds = high timing (26.25°)
• To save, set the control lever for the motor control to full throttle at the desired setting.
i) Restoring Default Settings
Usetheprogrammeitem"FactorySettings"toresettheightcontrollertoitsbasicsettings.Ifyoundanyundesired
reactionsintheoperationofthemodelorightcontroller,activatefactorysettings.
The factory settings can be programmed as follows:
• Switch the transmitter on and then put the throttle lever for motor control to the full throttle position.
• Thenconnecttheightbatterytotheightcontrolleragain.
• Theightcontrollerwillswitchtoprogrammingmodeaftervarioussignalsoundsandstartwiththerstprogram-
ming item, "Motor brake". This is indicated by a brief signal sound. Wait until you hear a long signal sound and two
shortsignalsounds.Nowpullthecontrolleverforthemotorcontrolbackalltheway(position"Motoroff").
• Tosave,setthecontrolleverforthemotorcontroltofullthrottle.Theightcontrollerisnowresettofactorysettings.