Instructions

61
e) Setting the Rudder Deections
Iftheconstructionisperformedandthetransmittersetcorrectly,theruddersshouldhavethefollowingrudderdeec-
tionvalues:
Aileron 10 mm upwards 10 mm downwards
Elevator 10 mm upwards 10 mm downwards
Rudder 10 mm to the left 10 mm to the right
Attention!
 Theindicatedvaluesshowtherudderdeectionstobeselectedfortherstights.
 Adjustthedeectionstoyourpersonalpreferencesafterafamiliarisationperiod.
The enclosed remote control system does not permit setting of the servo paths at the transmitter and thus
therudderdeectionsatthemodelasmoreexpensivecomputer-basedremotecontrolsystemsdo.To
changetherudderdeections,thevaluesaresetbyrepositioningthepushrodsontherudderhornsorthe
aps.
Figure 27