Instructions

60
Motor Function:
Attention!
 Ensurethatnolooseparts,suchaspaper,lmorotherobjectscanbesuckedintotherotorduringthis
motor test. Also make sure that the model is held securely during this test run and that no clothing and body
parts are within the rotation range or danger area of the rotor.
• Push the control lever for the motor function to the bottom position.
• Firststartthetransmitter,thenthemodel.Dependingonhowtheightcontrollerisprogrammed,theightcontrol-
ler'sreadinessforoperationissignalledbydifferentsignalsounds.
Figure 25
• Push the control lever for the motor function slowly from the bottom to the top position. The rotor will start up and
increase speed depending on control lever position.
• When the control lever is at the top stop, the maximum rotor speed is reached. Then move the control lever back
to the bottom-most position.
• Perform a brief motor test and check the run of the rotor.
• Disconnecttheightbatteryfromthemodelandswitchoffthetransmitter.
Figure 26