Instructions

Rudder function:

Ifthecontrolstickfortherudderfunctionismovedtotheleft,theruddermustdeecttotheleft.Therearrudderedge

mustbedeectedtotheleftbyapprox.10mm.Inight,thelandinggearispressedtotherightandthemodelies

to the left.

Figure 23

Ifthecontrolstickfortherudderfunctionismovedtotheright,theruddermustdeecttotheright.Therearrudder

edgemustbedeectedtotherightbyapprox.10mm.Inight,thelandinggearispressedtotheleftandthemodel

iestotheright.

Figure 24

 Iftherudderdoesnotdeectasdescribedabove,the"Servo-Reversefunction"atthetransmittermustbe

usedtochangetherunningdirectionoftheservos.Furtherinformationonthiscanbefoundintheoperating

instructions for the remote control.