Instructions

56
c) Setting the Centre of Gravity
Theightmodelmustbesetbyproperplacementoftheightbattery(and,ifrequired,byadditionoftrimmingweights;
not enclosed) so that the centre of gravity is approx. 60 mm behind the nose strip of the wing.
Todoso,markthecorrespondingcentreofgravitypositionatthebottomofthewingwithapen.Fromthebottom,hold
theassembledandready-to-ymodelatthemeasuredpositionswithyourindexngers(oracorrespondingdevice).
Ifthecentreofgravityissetcorrectly,theightmodelshouldbeleaningslightlyforward.
Important!
Always measure the centre of gravity with the canopy in place.
 Fortherstights,setthecentreofgravityatapprox.62mmwingdepthinsteadofat60mm.Thebest
centre of gravity then can be reset slowly.
Figure 18