Instructions

49
• Ifyoupushthecontrolleverfortherudderandelevatorfunctions(seegure2,pos.4)totheleft,theruddermust
deecttotheleft.Inight,thispushesthetailunittotherightandthemodelwillrolltotheleftarounditslongitudinal
axisduetothechangedowsituationatthewings.Youhavetoslightlypullontheelevatorsothatthemodeldoes
not lose any height in this slanted position.
• If the rudder reacts opposite to the function described above, you may change the direction of the rudder servo with
thereverseswitch(seegure2,pos.7).Thereisaseparateswitchforeachcontrolchannel.Therudderdirection
is switched with the outer left switch (CH1).
Figure 16
• Ifyoupushthecontrolleverfortherudderandelevatorfunctions(seegure.2,pos.4)totheright,therudder
mustdeecttotheright.Inight,thispushesthetailunittotheleftandthemodelwillrolltotherightaroundits
longitudinalaxisduetothechangedowsituationatthewings.Youhavetoslightlypullontheelevatorsothatthe
model does not lose any height in this slanted position.
Figure 17
• Afternishingyourtest,rstturnoffthemodelandthenthetransmitter.