Instructions

11. Final Assembly of the Model Airplane

Before starting with the assembly of the model, you should ensure an appropriate surface

In order to attain excellent airplane performances, your model is manufactured with a light plastic foam. However, this

is very sensitive. Small mistakes during assembly of the model quickly lead to unsightly bumps or even holes in the

surface. Therefore, handle the model with care.

a) Assembly of the wings

• Putbothwinghalvesushtogether(1)andthenattach

the top wing connection element (2).

• Then turn the wings around so that the top side faces

downwards and then attach the bottom wing connection

element (3) according to the illustration.

Make sure that the borings fort he attachment screws

areushwitheachother.

• Now screw the bottom wing connection element togeth-

er with the top element using the enclosed 2.6 x 8 mm

attachment screws (4).

Figure 6