Instructions
17
12. The First Start
a) Start
The operation and handling of remote controlled ight models must be learned! If you have never steered
such a model, start especially carefully and get used to the reactions of the model to the remote control
commands rst. Do be patient! Use the information from chapter 11 as reference.
Do not take any risks when operating the product! Your own safety and that of your environment depends
completely on your responsible use of the model.
Figure 9
• Put the control stick for the motor control to the bottom position for this (1).
• Switch on the quadrocopter (2). The front LEDs in the model start to ash quickly.
• Place the model on a level surface as smooth as possible (e.g. stone oor). A carpet is less suitable because the
landing legs may bet caught in the carpet easily. The front (black) rotors point forward (away from you).
• Switch on the remote control transmitter by pushing the on/off switch (3). The transmitter conrms this with a double
signal sound. The control LED at the transmitter (g. 3, item 2) will ash.
• Push the left control lever (4) forward until a control sound sounds.
• Pull the left control lever (5) backwards until a control sound sounds. The control LED at the transmitter and the
LEDs at the quadrocopter are now permanently lit.
• The quadrocopter is now bound to the transmitter and ready to start.