Instructions
16
d) Roll Function
"Roll" denotes the movement around the centre line which can be compared to the sideways rolling of a ball (or the
sideways crawl of a crab). In this way, through lifting one side the quadrocopter moves independent of its forward
direction to the side.
If you move the right control lever to the left, the quadrocopter will oat to the left as a whole. If you move the control
lever to the right, the quadrocopter will oat to the right. If the quadrocopter drifts slowly to the left in hover ight (direc-
tion of the white arrow), the model must be trimmed with the trim (see chapter "Trimming").
Figure 7
e) Flight Mode
The quadrocopter permits you to choose between three different ight modes de-
pending on your experience.
Change the ight mode by briey pushing the left control lever at the transmitter
(see gure 8).
In beginner mode, the control commands are limited to permit you learning how
to y the quadrocopter very quickly and easily. This ight mode is recommended
for pilots who have no or only very little ight experience with helicopters or quad-
rocopters yet. The beginner's mode is the basic conguration after switching the
transmitter on each time.
The advanced mode is recommended to pilots who have already collected some experience with other quadrocopter
models. In this mode, the quadrocopter is much more agile in its control conduct than in beginner's mode. In order
to activate this mode, push the left control stick at the transmitter (gure 8) briey repeatedly until you hear a double
sound.
The professional mode is recommended to pilots who have already collected a lot of experience with other quadro-
copter models. In this mode, the quadrocopter is even more agile in its control conduct than in advanced mode. In
order to activate professional mode, push the left control stick at the transmitter (gure 8) briey repeatedly until you
hear a triple sound.
Pushing the left control stick again will return you to beginner's mode. This is signalled by a single control sound.
Figure 8