Instructions

42
Ifthecontrolstickfortheelevatorfunctionismovedup,theelevatormustdeectdownwards.Therearrudderedge
mustbedeecteddownwardsbyapprox.10mm.Inight,thelandinggearispressedupwardsandthemodeldives.
This control function is required to put the model into a normal light position if it wants to ascend too much due to a
control error or a gust of wind.
Figure 11
Aileron function
If the control lever for the aileron function is moved to the left, the left wing’s aileron must break out to the top and the
aileronoftherightwingtothebottom.Therearrudderedgemustbedeecteddownwardsorupwardsbyapprox.
12mm.Inight,thispressesthewingtothelowerleftandthemodeliestotheleftwithalittleelevatorsupport.
Figure 12
If the control lever for the aileron function is moved to the right, the left wing’s aileron must break out to the bottom and
theaileronoftherightwingtothetop.Therearrudderedgemustbedeectedordownwardsorupwardsbyapprox.
12mm.Inight,thispressesthewingtothelowerrightandthemodeliestotherightwithalittleelevatorsupport.
Figure 13